WelcomeCompany ProfileNewsHistoryQ-ManagementEngineering PartnersIT PartnersSkills & ToolsJobs
EVENTS
Visit us at Aircraft Interiors Expo 2012 in Hamburg. Our stand, Hall B7 Stand 7E6, is situated in the Young Innovative German Companies Pavilion. GURUCAD will showcase innovative products / solutions / concepts based on CATIA V5 for Aerospace Industry.
|
GURUCAD - News
30 November 2010
GURUCAD Quality Management System is certified by qm cert UG according to: DIN EN ISO 9001:2008 (Certificate Nr. 11-2104898610, valid until 28.11.2013) and DIN EN 9100:2003 (Certificate Nr. 11-6502402710, valid until 28.11.2013). GURUCAD QM
18 - 20 May 2010
Visit us at Aircraft Interiors Expo 2010 in Hamburg, we will be situated at only few steps from AIRBUS Stand - Hall B7 Stand 7B36. GURUCAD will showcase innovative products / solutions / concepts / workshops for Aerospace Industry.
For the first time at Aircraft Interiors Expo, GURUCAD will show new ways of working for Aerospace Industry, value-added solutions/products and present our competences in the area of design and stress analysis for Aerospace Industry.
As a short overview of our Agenda:
- GURUCAD - Breaking The Knowledge Limits In Aerospace Industry
- GURUCAD Aerospace Solutions/Products
- GURUCAD CABIN LAYOUT GENERATION
- DMU Solutions for automated DMU Reviews
- Innovative methods/processes for Aerospace Industry
- GURUCAD - Added-Value for our customers in Aerospace Industry
- Q & A Sessions
We will be situated in Hall B7, Stand 7B36, near AIRBUS (Hall B7 Floorplan).
We kindly invite you to visit us and enjoy exchanging innovative ideas in Aerospace Industry. The entrance is free and the expo will be open between 9:00 and 17:00 o'clock. For more information please visit: Aircraft Interiors Expo 2010 Web-Site
15 February 2010
GURUCAD V5 CABIN LAYOUT GENERATION nominated for CRYSTAL CABIN AWARD 2010 in the Category Industrial Design/ Interior Concept Crystal Cabin Award 2010 Shortlist
We are happy to announce you that our solution - GURUCAD V5 CABIN LAYOUT GENERATION is nominated for CRYSTAL CABIN AWARD 2010 in the Category Industrial Design/ Interior Concept. This nomination proves the high level of innovation of our solution.
Lunched in 29 June 2009, GURUCAD V5 CABIN LAYOUT GENERATION it is an innovative solution for Aerospace Industry that standardize and radically improve the process of generating a cabin interior layout in CATIA V5, both in 3D and 2D.
For more information please visit our dedicated section to our GURUCAD V5 CABIN LAYOUT GENERATION solution.
16 November 2009
GURUCAD launch the AEROSPACE Division Website. Here you will find all GURUCAD competences, products, trainings and innovative concepts for Aerospace Industry.
Because of our huge competences build for Aerospace Industry and also because of our growing number of products/solutions, trainings and innovative concepts we decided to build a new web-site entirely dedicated to Aerospace Industry
Here you will get in touch with our competences in:
- Aerospace Structure Area
- Aerospace Systems Area
- Aerospace Cabin Interior Area
- Aerospace Cargo Area
- Aerospace DMU Integration Area
- Aerospace Jigs & Tools Area
- Aerospace Manufacturing Area
but also with:
17 August 2009
GURUCAD launch innovative PLM-CAx Training & Education Services for several CAx Software, PLM Tools and Industries.
This suite of PLM-CAx Training & Education Services will helps companies get their engineering work-force faster prepared for successfully fulfilling engineering tasks.
GURUCAD trainings portfolio cover: CAx Software Trainings (CATIA V5/V4, CATIA CADAM DRAFTING, Pro/ENGINEER, Unigraphics, SolidWorks, SolidEdge), PLM Tools and AEROSPACE Industry Trainings.
The key benefits for our customers will be:
- trainers with long experience in the engineering field for several vertical industries
- real-world practical examples for maximizing integration of CAx solution philosophy with theoretical real engineering concepts
- possibility to customize the trainings to fit your company methods and engineering field
- high flexibility of our trainers, they can support you also on-site GURUCAD PLM-CAx Training & Education Services
10 August 2009
GURUCAD launch a new innovative suite of services: "DESIGN TIME CUTTER". Achieve with smaller budget, better productivity, quality and standardisation in your organisation.
This suite of services will streamline companies processes in achieving with smaller budget, better productivity, quality and standardisation in their organisation.
- small implementation time
- capabilities to cover the entire engineering & design processes
- budget reduction between 10-60%
- GURUCAD fees are based on customer reduced budget (force us to streamline at maximum your processes)
- support and service of the complete implemented framework of solutions will be provided by GURUCAD at no aditional costs
- clean your organisation processes of gaps and wasted resources time in non-value tasks that can be automated
DESIGN TIME CUTTER
6 July 2009
GURUCAD provide Engineering & IT services for a new vertical industry: Reneweble Energy. 2D/3D design, rendering services, migration from 2D to CATIA V5 3D.
GURUCAD is covering the entire design life-cycle of the Renewable Energy Industry:
- First concepts creation (2D or 3D by means of CATIA V5 skeleton model)
- 3D detailing (3D detailing in CATIA V5)
- Rendering generation for marketing presentations (Rendering in CATIA V5)
- 2D drawings generation based on 3D data (2D detailing in CATIA V5 or AUTOCAD)
- Migration services from 2D (AUTOCAD) to 3D CATIA V5 (CATIA V5 implementation/installation, CATIA V5 methodology support, CATIA V5 trainings, CATIA V5 on-site support)
- Process improvement by streamlining and standardizing the engineering and design sub-processes for reaching up to 40% time/cost reduction.
Reneweble Energy Industry
29 June 2009
GURUCAD launch first V5 CABIN LAYOUT GENERATION TOOL based on CATIA V5. Automaticaly generate an aircraft 2D and 3D Layout in CATIA V5.
This product is the first from a series dedicated to AEROSPACE Industry.
GURUCAD is committed to innovate/improve/standardise the AEROSPACE processes dedicated to Engineering and Design.
GURUCAD has developed the first V5 CABIN LAYOUT GENERATION TOOL based on CATIA V5:
- Automatically position the cabin components (Galleys, Lavatories, Seats, Hatracks...) in the aircraft, in CATIA V5 - 2D and 3D
- Positioning of one component in the cabin is taking less than 1 second (CATIA V5 2D and 3D)
- Possibility to customise/extend the application to work with any Cabin Interior Components
- Rendering capabilities can be implemented for components families
- All FAR, JAR requirements concerning cabin components can be integrated in this application
- An XML file will be generated with all the positions of the cabin components so that the suppliers working with other CAD systems can use this information and automatically position their components (GURUCAD provide programming services for up to 7 CAD systems)
GURUCAD V5 CABIN LAYOUT GENERATION
29 April 2009
GURUCAD launch first products-pack (5 products in category CATIA V5 Tools)
GURUCAD has developed the following products as CATIA V5 Tools:
- GURUCAD V5 STARTER (optimisation and management of starting process for multiple CATIA V5 releases)
- GURUCAD V5 PART MIRROR CREATION (automatically creation of mirror parts)
- GURUCAD V5 PRODUCT TO PART (automatically creation of a part out of a product/assembly)
- GURUCAD V5 MIDDLE SURFACE GENERATOR (automatically generate middle surfaces from solid walls for use in FEM)
- GURUCAD V5 WEIGHT ANALYSER (measure weight and COG coordinates for parts, products also from drawing context)
GURUCAD Products
1 October 2008
GURUCAD become "SECOND TIER SUPPLIER FOR EADS" (AIRBUS, EUROCOPTER, EADS ASTRIUM and all others EADS Subsidiaries)
1 October 2008
GURUCAD sign a partnership with Altran Technologies (ALTRAN GmbH & Co. KG)
|
|
|
